PERVO PAINT CO -- NAVAJO WHITE ACRYLIC SEMI-GLOSS, 0725  -- 8010-00N056646
<pre>=====================  Product Identification  =====================

Product ID:NAVAJO WHITE ACRYLIC SEMI-GLOSS, 0725
MSDS Date:03/09/1993
FSC:8010
NIIN:00N056646
=== Responsible Party ===
Company Name:PERVO PAINT CO
Address:6624 STANFORD AVE
City:LOS ANGELES
State:CA
ZIP:90001
Country:US
Info Phone Num:213-758-1147
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:86483
=== Contractor Identification ===
Company Name:PERVO PAINT CO
Address:6624 STANFORD AVE
Box:City:LOS ANGELES
State:CA
ZIP:90001
Country:US
Phone:213-758-1147
CAGE:86483

=============  Composition/Information on Ingredients  =============

Ingred Name:AMMONIUM HYDROXIDE; (AMMONIA) (CERCLA)
CAS:1336-21-6
RTECS #:BQ9625000
Fraction by Wt: TRACE
OSHA PEL:50 PPM (MFR)
ACGIH TLV:25 PPM (MFR)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
    2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (TEXANOL)
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 2-3%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2-3%
OSHA PEL:N/K 
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:VOC: 250 G/L (2.08 LBS/GAL) (EX. WATER/EXEMPT SOLVENT); 104
    G/L (0.87 LBS/GAL) (IN. WATER/EXEMPT SOLVENT)
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: PROLONGED OR REPEATED
    CONTACT MAY CAUSE IRRITATION. EYES: DIRECT CONTACT CAN CAUSE
    IRRITATION. INHALATION: VAPOR OR MIST CAN CAUSE HEADACHE, NAUSEA,
    IRRITATION OF NOSE, THROAT AND EYES. I NGESTION: POISONOUS IF
    SWALLOWED. CAN AFFECT THE OPTIC NERVE AND OTHER EFFECTS. CHRONIC:
    NONE EXPECTED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAM
    CLTHG. GET IMMED MED ATTN. LAUNDER CONTAM CLTHG BEFORE REUSE. EYES:
    FLUSH W/GENEROUS AMTS OF WATER FOR AT LEAST 15 MIN. GET IMMED MED
    ATTN. INGE ST: DO NOT INDUCE VOMIT. DILUTE W/WATER/MILK & CALL MD
    IMMED. NEVER GIVE FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING
    CONVULSIONS. INHAL: MOVE TO FRESH AIR. AID IN BRTHG IF NEC, & GET
    IMMED MED ATTN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE WATER FOG, DRY CHEMICAL, FOAM OR CARBON
    DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED, AND
    PLACED IN A RCRA LICENSED FACILITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
    WHEN VAPORS ARE GENERATED ABOVE THE PERMISSIBLE LIMIT.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMENDED PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:COVERALLS, APRONS, BOOTS AS NEC TO PVNT SKIN
    CONT. EMER EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:SHOWER AFTER HANDLING THIS PRODUCT. CLEAN
    CLOTHING SHOULD BE WORN DAILY.
Supplemental Safety and Health
WASTE DISP METH: OTHER CONTRS MUST BE DISP OF IN RCRA LICENSED
    FACILITY. DISP OF I/A/W LOC, STATE & FED REGS .

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:1.4 @ 20C
Vapor Density:0.62
Spec Gravity:1.2
pH:>9
Evaporation Rate &amp; Reference:0.33 (BUTYL ACETATE=1)
Solubility in Water:SOLUBLE
Appearance and Odor:NAVAJO WHITE VISCOUS LIQUID, WITH SLIGHTLY AMMONIA
    ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT OR DIRECT STRONG
    SUNLIGHT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCIN IN RCRA LICENSED FACILITY. DO NOT
    DISCHARGE INTO WATERWAYS/SEWER SYS W/OUT PROPER AUTH. EMPTY CONTRS
    W/NO RESIDUE AT ALL MAY BE LANDFILLED AT LICENSED FACILITY FOR
    RECONDITION. REC CRUSHING/OTHE R MEANS TO PVNT UNAUTH REUSE. (SUP
    DAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.