ITW DEVCON -- STAINLESS STEEL PUTTY(ST) HARDNER  -- 8030-00D003028
<pre>=====================  Product Identification  =====================

Product ID:STAINLESS STEEL PUTTY(ST) HARDNER
MSDS Date:05/06/1992
FSC:8030
NIIN:00D003028
=== Responsible Party ===
Company Name:ITW DEVCON
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923
Country:US
Emergency Phone Num:804-463-3476
CAGE:0RZG3
=== Contractor Identification ===
Company Name:ITW DEVCON
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923-3712
Country:US
Phone:978-777-1100
CAGE:0RZG3

=============  Composition/Information on Ingredients  =============

Ingred Name:TRIETHYLENE TETRAMINE
CAS:112-24-3
RTECS #:YE6650000
Fraction by Wt: 40-60%
Other REC Limits:NONE RECOMMENDED

Ingred Name:POLYAMIDE OF C*18 FATTY ACID PRIMERS AND TETA
CAS:68410-23-1
Fraction by Wt: 50-70%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 2460 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES-SEVERE IRRITATION OR BURNS.
    SKIN-SEVERE IRRITATION  OR BURNS. INHALATION-IRRITATION OF NOSE AND
    THROAT; NAUSEA AND VOMITING IN SEVERE CASES. INGESTION-MAY CAUSE
    BURNS OF MOUTH AND THROAT AND GAST ROINTESTINAL IRRITATION OR
    ULCERATION.
Explanation of Carcinogenicity:INGREDIENTS LISTED: NO
Effects of Overexposure:REPEATED SKIN CONTACT OR INHALATION OF FUMES
    CAN CAUSE SENSITIZATION, WITH ITCHING, RASHES, OR SWELLING OF THE
    SKIN OR AN ASTHMA-LIKE RESPIRATORY REACTION ON LATER EXPOSURE TO
    THE PRODUCT. REPEATED OV EREXPOSURE TO TETA CAN CAUSE LIVER AND
    KIDNEY EFFECTS.
Medical Cond Aggravated by Exposure:ASTHMA, BRONCHITIS OR SKIN
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYES-IMMEDIATELY FLUSH WITH CLEAN WATER FOR AT LEAST 15 MIN.
    WHILE GENTLY HOLDING EYELIDS OPEN. GET MEDICAL HELP AS SOON AS
    POSSIBLE. SKIN-IMMEDIATELY REMOVE CONTAMINATED CLOTHING AND WASH
    WELL WITH D OAP AND WARM WATER. SEE DOCTOR IF IRRITATION DEVELOPS.
    INHALATION-REMOVE PATIENT TO FRESH AIR. GIVE OXYGEN OR CPR IF
    NEEDED. INGEATION-DO NOT INDUCE VOMITING. DILUTE WITH MILK/WATER &
    GET MEDICAL AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
    BREATHING APPARATUS AND SUFFICIENT PROTECTIVE GEAR TO PREVENT ALL
    SKIN AND EYE CONTACT WITH THIS MATERIAL.
Unusual Fire/Explosion Hazard:DECOMPOSITION PRODUCES HAZARDOUS FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PREVENT SKIN AND EYE CONTACT; REMOVE
    CONTAMINATED CLOTHING AND SHOES. ABSORB SPILL ON INERT MATERIAL
    SUCH AS VERMICULITE; SCRAPE UP AND TRANSFER TO IMPERVIOUS
    CONTAINERS. SCRUB SPILL AREA WITH STRONG  DETERGENT AND WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE WELL-CLOSED IN A COOL, DRY
    PLACE. KEEP HANDS AWAY FROM EYES WHEN HANDLING, AND UNTIL HANDS ARE
    WASHED AFETR USING MATERIALS.
Other Precautions:IF THIS PRODUCT IS SANDED OR MACHINED AFTER CURING,
    TAKE APPROPIATE PRECAUTIONS AGAINST INHALATION OF NUISANCE
    PARTICLES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED IN NORMAL USE WITH PROPER
    VENTILATION. IN POORLY VENTILATED AREAS USE NIOSH-APPROVED ORGANIC
    VAPOR RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENTILATION IS ADEQUATE FOR OCCASIONAL
    USE. FOR PROLONGED OR REPEATED USE, LOCAL EXHAUST.
Protective Gloves:CHEMICAL-RESISTANT.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELD.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER
    THOROUGHLY BEFORE REUSE.
Supplemental Safety and Health
PROPER SHIPPING NAME: CORROSIVE LIQUID, N.O.S.. (CONTAINER<1 PINT ARE
    ORM-D).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>450F,>232C
Melt/Freeze Pt:M.P/F.P Text:N/D
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.98
pH:10-11
Evaporation Rate &amp; Reference:<1
Solubility in Water:30-60%
Appearance and Odor:WHITE PASTE WITH MILD AMMONIA-LIKE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT OR OPEN FLAMES.
Hazardous Decomposition Products:ACRIDS AND TOXIC FUMES WITH ORGANIC
    AMINES, AMMONIA, OXIDES OF CARBON AND NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP OUT OF PUBLIC WATER SUPPLIES. INCINERATE IN
    APPROVED FACILITY WHERE PERMITTED BY STATE AND LOCAL REGULATION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.