BECO CHEMICAL CO -- ANTIFREEZE HEAVY DUTY  -- 6810-00-181-7933
<pre>=====================  Product Identification  =====================

Product ID:ANTIFREEZE HEAVY DUTY
MSDS Date:01/01/1987
FSC:6810
NIIN:00-181-7933
=== Responsible Party ===
Company Name:BECO CHEMICAL CO/LYNWOOD, CA 90262
Emergency Phone Num:(213) 567-2481
CAGE:3R190
=== Contractor Identification ===
Company Name:BECO CHEMICAL CO INC
Address:11865 S ALAMEDA ST
Box:City:LYNWOOD
State:CA
ZIP:90262-4022
Country:US
Phone:213-567-2481
CAGE:3R190

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 99%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:DAMAGE TO KIDNEYS, LIVER, CSN, TRANSIENT, EYE
    IRRITATION. INGESTION OF 3 OUNCES MAY BE LETHAL.

=======================  First Aid Measures  =======================

First Aid:EYE & SKIN: WASH WITH WATER. DECONTAMINATE CLOTHING BEFORE
    REUSE IF INGESTED INDUCE VOMITING IMMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:250F OPEN CUP
Extinguishing Media:WATER FOG, ALCOHOL FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS-SOAK UP WITH ABSORBANT MATERIAL.
    LARGE SPILLS-DIKE & PUMP INTO CONTAINE. CLEAN UP WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED SKIN CONTACT. PRACTICE
    REASONABLE CARE AND CLEANLINESS. AVOID BREATHING SPRAY  MIST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY NEEDED
Ventilation:LOCAL EXHAUST: CONTROL VAPORS AND MIST.
Protective Gloves:RECOMMENDED
Eye Protection:NOT NORMALLY NECESSARY
Supplemental Safety and Health
MSDS UNDATED.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:  330F
Vapor Pres:LOW
Vapor Density:1
Spec Gravity:1.13
Solubility in Water:COMPLETE
Appearance and Odor:GREENISH BLUE LIQUID, SLIGHT ODOR BURNED GREASE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL
Stability Condition to Avoid:AUTOIGNITION TEMPERATURE IN AIR >800F.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN ACCORDING TO LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.