MITA COPYSTAR AMERICA INC -- STATIC ELIMINATOR SPRAY  -- 6850-00N033369
<pre>=====================  Product Identification  =====================

Product ID:STATIC ELIMINATOR SPRAY
MSDS Date:03/01/1990
FSC:6850
NIIN:00N033369
=== Responsible Party ===
Company Name:MITA COPYSTAR AMERICA INC
Address:777 TERRACE AVE
Box:813
City:HASBROUCK HEIGHTS
State:NJ
ZIP:07604
Country:US
Info Phone Num:201-288-6900
Emergency Phone Num:201-288-6900
CAGE:0AH08
=== Contractor Identification ===
Company Name:MITA COPYSTAR AMERICA INC
Address:2930-B S FAIRVIEW ST
Box:813
City:SANTA ANA
State:CA
ZIP:92704
Country:US
Phone:714-556-0318
CAGE:0AH08
Company Name:MITA INDUSTRIAL CO.LTD;MITA COPYSTAR AMERICA,INC.
Address:777 TERRACE AVENUE
Box:813
City:HASBROUCK HEIGHTS
State:NJ
ZIP:07604-3110
Country:US
Phone:201-288-6900
CAGE:65678

=============  Composition/Information on Ingredients  =============

Ingred Name:NONHAZARDOUS INGREDIENTS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EFFECTS OF OVEREXPOSURE MAY IRRITATE EYES.
Medical Cond Aggravated by Exposure:NONE.

=======================  First Aid Measures  =======================

First Aid:SKIN: FLUSH WITH WATER. EYES: IMMED FLUSH WITH POTABLE WATER
    FOR A MINIMUM OF 15 MIN, SEEK ASSISTANCE FROM MD . INHAL: REMOVE TO
    FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTF RESP) . INGEST: CAL L MD
    IMMED .

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:NONE
Extinguishing Media:IF PRODUCT BECOMES INVOLVED IN A FIRE, USE CO*2
    EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE UNDER NORMAL STORAGE AND USE
    CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
    FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE KNOWN.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:30
Spec Gravity:1.0(H*2O=1)
pH:6.3
Solubility in Water:INFINITE
Appearance and Odor:MILKY WHITE-VERY LITTLE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL MAY CAUSE A REACTION.
Hazardous Decomposition Products:SIO*2, CO*2, & TRACES OF INCOMPLETELY
    BURNED CARBON PRODUCTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.