HAYNES INTL INC/CABOT CORP. -- WASPALOY (2590)  -- 9515-00F016513
<pre>=====================  Product Identification  =====================

Product ID:WASPALOY (2590)
MSDS Date:02/01/1989
FSC:9515
NIIN:00F016513
=== Responsible Party ===
Company Name:HAYNES INTL INC/CABOT CORP.
Address:1020 W PARK AVE
Box:9013
City:KOKOMO
State:IN
ZIP:46902-9013
Info Phone Num:(317) 456-6020
Emergency Phone Num:(317) 456-6020 OR (317) 456-6894
CAGE:FO783
=== Contractor Identification ===
Company Name:HAYNES INTERNATIONAL INC SUB OF CABOT CORP
Address:1020 W PARK AVE
Box:9013
City:KOKOMO
State:IN
ZIP:46904-9013
Country:US
Phone:318-263-2002;765-456-6614
CAGE:80357
Company Name:HAYNES INTL INC/CABOT CORP.
Address:1020 W PARK AVE
Box:9013
City:KOKOMO
State:IN
ZIP:46902-9013
Phone:(317) 456-6020
CAGE:FO783

=============  Composition/Information on Ingredients  =============

Ingred Name:ALUMINUM  (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 1.5%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

Ingred Name:BORON
CAS:7440-42-8
RTECS #:ED7350000
Fraction by Wt: 0.006%

Ingred Name:COBALT  (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 13.5%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293

Ingred Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 19%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.1%
Other REC Limits:1 MG(CU)/M3 (DUST)
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 2%
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293

Ingred Name:MANGANESE  (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 0.1%
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293

Ingred Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 4.3%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Ingred Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 58%
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Ingred Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 0.15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:TITANIUM (DRY POWDER) (TI)
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 3%

Ingred Name:ZIRCONIUM
CAS:7440-67-7
RTECS #:ZH7070000
Fraction by Wt: 0.05%
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3/10 STEL;9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:YES
Health Hazards Acute and Chronic:INHALATION: METAL DUST/FUMES MAY CAUSE
    MUCOUS MEMBRANE IRRITATION, RESPIRATORY IRRITATION, COUGH,
    BRONCHITIS, CHILLS, FUME FEVER, & ASTHMA-LIKE SYMPTOMS. SKIN:
    IRRITATION, ALLERGIC REACTION, & DERMATI TIS. EYES: PARTICULATE
    IRRITATION/MECHANICAL INJURY TO COREA/CONJUNCTIVA. INGESTION:
    IRRITATION.
Explanation of Carcinogenicity:CHROMIUM & NICKEL ARE CONSIDERED TO BE A
    CARCINOGEN.
Effects of Overexposure:INHALATION: RESPIRATORY DISEASE, SHORTNESS OF
    BREATH, COUGH, PERMANENT DISABILITY, SERIOUS LUNG INJURY, FIBROSIS,
    EFFECTS ON HEART, CNS DEPRESSION, NASAL, BRONCHIAL, LUNG CANCERS,
    GASTRO-INTESTINAL DI SORDERS, CHANGES IN LUNGS, MUCOUS MEMBRANE
    IRRITATION. SKIN/EYES: INJURY.
Medical Cond Aggravated by Exposure:ALLERGIC REACTION OR SENSITIVITY TO
    METALS, PULMONARY FUNCTION, AIRWAY DISEASE, ASTHMA, EMPHYSEMA,
    CHRONIC BRONCHITIS, DAMAGE/DISEASE TO NERVOUS, CIRCULATORY,
    HEMATOLOGIC, RENAL SYSTEMS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/COPIOUS AMOUNTS OF CLEAN WATER. SKIN: TREAT
    CUT/ABRASIONS BY STANDARD FIRST AID. CONTAMINATION BY DUST/POWDER
    CAN BE REMOVED BY SOAP & WATER. INGESTION: DRINK LARGE QUANTITIES
    OF WATER.  INDUCE VOMITING IF CONSCIOUS. INHALATION: REMOVE TO
    FRESH AIR. IF BREAATHING STOPPED, PERFORM ARTIFICIAL RESPIRATION.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:THESE ALLOYS ARE NONCOMBUSTIBLE. USE EXTINGUISHING
    MEDIA APPROPRIATE TO THE SURROUNDING FIRE.
Fire Fighting Procedures:TO EXTINGUISH A METAL POWDER FIRE USE DRY
    SAND, DRY GRAPHITE, OR OTHER CLASS D FIRE EXTINGUISHING POWDER.
Unusual Fire/Explosion Hazard:IF MATERIALS ARE REDUCED TO POWDER FORM,
    CAUTION MUST BE USED TO PREVENT FIRE/EXPLOSION. EVOLUTION OF
    HYDROGEN MAY BE AN EXPLOSION HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IN SOLID FORM MATERIALS POSE NO SPECIAL
    CLEAN-UP PROBLEMS. IF MATERIAL IS IN POWDER/DUST FORM, CLEAN-UP
    SHOULD BE CONDUCTED W/VACUUM SYSTEM UTILIZING A HIGH EFFICIENCY
    PARTICULATE AIR FILTRATION SYSTE M. AVOID CONTAMINATION OF AIR &
    WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:HANDLE ACCORDING TO SIZE
    SHAPE/QUANTITY OF MATERIAL INVOLVED. SOLID METAL MAY REQUIRE USE OF
    HOISTS/CRANES, ETC. STORE METAL/METAL POWDER IN DRY AREA.
Other Precautions:DON'T STORE ADJACENT TO MINERAL ACIDS. FINE METAL
    POWDER SHOULD BE KEPT AWAY FORM FLAMES & SOURCES OF IGNITION. AVOID
    BREATHING DUST OR FUME.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS. LUNG FUNCTION
    TESTS ARE RECOMMENDED FOR USERS OF NEGATIVE PRESSURE DEVICES. USE
    FUME RESPIRATOR OR AN AIR SUPPLIED RESPIRATOR TO KEEP <TLV.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP DUST & FUME <TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:UNIFORMS, DISPOSABLE COVERALLS, SAFETY SHOES
Supplemental Safety and Health
HEAT RESISTANT ALLOY PRODUCTS MAY CONTAIN VARYING CONCENTRATIONS, FROM
    ELEMENTAL CONTITUENTS, ALUMINUM, COBALT, CHROMIUM, COPPER, IRON,
    MANGANESE, MOLYBDENUM, NICKEL, & TUNGSTEN. WELDING, THERMAL CUTT
    ING, GRINDING & MELTING THIS PRODUCT MAY PRODUCE CHEMICALS KNOWN TO
    THE STATE OF CALIFORNIA TO CAUSE CANCER.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text: 2425F
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID-SILVER GRAY COLOR, NO ODOR
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS, OXIDIZING AGENTS
Stability Condition to Avoid:FLAMES, SOURCES OF IGNITION
Hazardous Decomposition Products:HYDROGEN GAS, VARIOUS ELEMENTAL
    METALS/METAL OXIDES,

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.