X-ERGON,A PARTSMASTER CO.,DIV. OF NCH -- STEELBOND SOLDER 1/8  -- 3439-01-044-9017
<pre>=====================  Product Identification  =====================

Product ID:STEELBOND SOLDER 1/8
MSDS Date:12/14/1988
FSC:3439
NIIN:01-044-9017
=== Responsible Party ===
Company Name:X-ERGON,A PARTSMASTER CO.,DIV. OF NCH
Address:1400 E NORTHGATE DR
Box:152170
City:IRIVING
State:TX
ZIP:75015-2102
Country:US
Info Phone Num:800-442-7950
Emergency Phone Num:214-438-1381
Preparer's Name:MICHAEL COLE
CAGE:EO081
=== Contractor Identification ===
Company Name:X-ERGON A PARTSMASTERS CO DIV NCH CORP
Box:152170
City:IRVING
State:TX
ZIP:75015
Country:US
Phone:972-438-1381
CAGE:55649
Company Name:X-ERGON,A PARTSMASTER CO.,DIV OF NCH
Box:152170
CAGE:EO081

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9293

Ingred Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
    GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
    FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
    SENSITIVITY MAY ALSO BE NOTED. A CUTE EXPOSURE FROM SOME TOXIC
    GASES MAYCAUSE PULMONARY EDEMA, ASPHYXIATION AND EXCESSIVE EXPOSURE
    CAN BE FATAL.
Effects of Overexposure:METALLIC TASTE, NAUSEA, TIGHTNESS OF CHEST,
    FEVER, DIZZINESS. EYE, NOSE, THROAT DRYNESS AND IRRITATION.
Medical Cond Aggravated by Exposure:PULMONARY DISEASES.

=======================  First Aid Measures  =======================

First Aid:IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL
    FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
    EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF
    BREATHING IS D IFFICULT. IF NOT BREATHING, BEGIN ARTIFICIAL
    RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
    EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
    COMBUSTIBLE PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
    AND PLACE IN SUITABLE DOT APPROVED DISPOSAL CONTAINER.

======================	Handling and Storage  ======================

Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
    MONITOR AIR TO ENSURE ACCEPTABLE EXPOSURES. AVOID ELECTRICAL SHOCK
    BY MAINTAINING DRY WORK AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
    SELF-CONTAINED BREATHING APPARATUS IF TLV IS EXCEEDED OR WHEN USING
    IN CONFINED SPACES.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE SHLD W/FILTER LENS.
Other Protective Equipment:LONG SLEEVE CLOTHES, ARM PROTECTOR, APRON,
    HAT, SHOULDR PROTECTION.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER WELDING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:GREY, SOLID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES OF METALS AND METAL
    OXIDES,CO,NO2,O3.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SEND FOR RECLAMATION OR DISPOSE OF IN ACCORDANCE
    WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.