CHEMRAY COATING CORP -- PRIMER SURFACER SANDING LACQ/ENAM GRAY36231 -- 8010-00-687-8191 
=====================  Product Identification  =====================

Product ID:PRIMER SURFACER SANDING LACQ/ENAM GRAY36231
MSDS Date:09/13/1989
FSC:8010
NIIN:00-687-8191
=== Responsible Party ===
Company Name:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Info Phone Num:201-245-1111
Emergency Phone Num:201-245-1111
Preparer's Name:FRED ARMSTRONG
CAGE:33832
=== Contractor Identification ===
Company Name:CHEMRAY COATING CORP
Address:209 N MICHIGAN AVE
Box:City:KENILWORTH
State:NJ
ZIP:07033
Country:US
Phone:201-245-1111
CAGE:33832

=============  Composition/Information on Ingredients  =============

Ingred Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 14.75%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:N-BUTYL ACETATE  (SARA III)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 44.5%
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200STEL;9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ALIPHATIC NAPTHA
CAS:6472-48-9
Fraction by Wt: 28%
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 12.75%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:VOC=4.76 LBS/GAL OR 571 GRAMS/LITER
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Health Hazards Acute and Chronic:OVEREXPOSURE-NAUSEA, HEADACHE,
    DIZZINESS CAUSED BY OVER INHALATION. SKIN CONTACT MAY CAUSE
    DERMATITIS. CAN ABSORB THROUGH SKIN AND CAUSE AUDITORY AND
    VESTIBULAR NERVE DAMAGE. SEVERE EYE, SKIN AND RESP IRATORY
    IRRITATION. NARCOTIC EFFECTS.
Effects of Overexposure:OVEREXPOSURE-NAUSEA, HEADACHE, DIZZINESS CAUSED
    BY OVER INHALATION. SKIN CONTACT MAY CAUSE DERMATITIS. CAN ABSORB
    THROUGH SKIN AND CAUSE AUDITORY AND VESTIBULAR NERVE DAMAGE. SEVERE
    EYE, SKIN AND RESP IRATORY IRRITATION. NARCOTIC EFFECTS.
Medical Cond Aggravated by Exposure:NONE GENERALLY KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH WITH WATER 15 MINUTES OR UNTIL IRRITATION
    SUBSIDES. IF IRRITATION PERSISTS, CALL PHYSICIAN. SKIN CONTACT:
    REMOVE CONTAMINATED CLOTHING AND WASH THOROUGHLY WITH SOAP AND
    WATER. INHAL ATION: IF OVERCOME BY VAPORS REMOVE TO FRESH AIR, CALL
    PHYSICIAN. INGESTION: DO NOT INDUCE VOMITING, CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:23 F/-5 C
Autoignition Temp:Autoignition Temp Text:867 F
Lower Limits:1.9
Upper Limits:11.7
Extinguishing Media:CARBON DIOXIDE, FOAM, WATER FOG OR DRY CHEMICAL.
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING EQUIPMENT. COOL
    ENCLOSED CONTAINERS WITH WATER SPRAY. AVOID BREATHING VAPORS OR
    FUMES.						.
Unusual Fire/Explosion Hazard:IF LEAK OR SPILL HAS IGNITED, USE WATER
    SPRAY TO DISPERSE THE VAPORS FROM FIRE FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP FROM HEAT,
    SPARKS AND OPEN FLAME. ADD ABSORBENT (SAND, EARTH, SAWDUST) TO
    SPILL. VENTILATE AREA (OPEN WINDOWS, DOORS). LARGE SPILL: KEEP FROM
    ENTERING SEWERS/WATERCOU RSES BY DIKING. ADVISE AUTHORITIES IF DOES
    ENTER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES, KEEP
    IN COOL, DRY, WELL VENTILATED AREAS. AVOID DIRECT SUNLIGHT AND
    EXTREME TEMPERATURES, HOT OR COLD.
Other Precautions:AVOID EYE, SKIN CONTACT, INHALATION &/OR INGESTION OF
    MISTS, SPRAY OR VAPORS. AVOID BREATHING SANDING OR BLASTING DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE HYDROCARBON VAPOR CANISTER OR SUPPLIED AIR
    RESPIRATOR IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST: FACE VELOCITY 60FPM. SPECIAL: USE ONLY
    W/ADEQUATE VENTILATION. MECHANICAL: USE EXPLOSION PROOF EQUIPMENT.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment:USE CHEMICAL RESISTANT APRON OR CLOTHING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:172 F,78 C
Melt/Freeze Pt:M.P/F.P Text:O F(-17.8C)
Decomp Temp:Decomp Text:600 F(316C)
Vapor Pres:15 @ 68 F
Vapor Density:> THAN AIR
Spec Gravity:1.11 (H2O=1)
Viscosity:*****
Evaporation Rate & Reference:2 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MEDIUM GRAY LIQUID WITH ALCOHOL ODOR.
Percent Volatiles by Volume:70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIAL WHEN HEATED TO DECOMPOSITION.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
    REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED DISPOSAL
    SITE OR FACILITY. DISPOSE IN CONFORMITY WITH STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.