TERRARD INDUSTRIES INC -- THREAD SEALER  -- 8030-00N042981
<pre>=====================  Product Identification  =====================

Product ID:THREAD SEALER
MSDS Date:09/12/1990
FSC:8030
NIIN:00N042981
=== Responsible Party ===
Company Name:TERRARD INDUSTRIES INC
Box:9947
City:FT LAUNDERDALE
State:FL
ZIP:33310
Country:US
Info Phone Num:305-974-5440
Emergency Phone Num:305-974-5440
Preparer's Name:PEYTON WHITE
CAGE:IO558
=== Contractor Identification ===
Company Name:TERAND INDUSTRIES
Box:9947
City:FT LAUDERDALE
State:FL
ZIP:33310
Country:US
Phone:305-974-5440 FAX 305-977-7513
CAGE:TERAN
Company Name:TERRARD INDUSTRIES INC
Box:9947
City:FT LAUNDERDALE
State:FL
ZIP:33310
Country:US
Phone:305-974-5440
CAGE:IO558

=============  Composition/Information on Ingredients  =============

Ingred Name:PROT GLOVES: POLYVINYL CHLORIDE.
RTECS #:9999999ZZ

Ingred Name:HNDLG/STOR PREC:INHAL CONTENTS CAN BE HARMFUL/FATAL. SPRAY
    SHOULD NOT BE DIRECTED TOWARD FACE/EYES, OPEN FLAME/ (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7: OTHER SOURCES OF IGNITION.
RTECS #:9999999ZZ

Ingred Name:FL PT METH: CPSC FLAME EXTENSION TEST.
RTECS #:9999999ZZ

Ingred Name:ETHANE, 1,1,1-TRICHLORO-; (TRICHLOROETHANE)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 42%
OSHA PEL:350 PPM;450 PPM STEL
ACGIH TLV:350 PPM;450 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Ingred Name:TOLUENE; (ACRYLIC COPOLYMER RESIN)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <3%
Other REC Limits:200 PPM (MFR)
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:HYDROCARBON PROPELLANT
CAS:68476-86-8
OSHA PEL:1000 PPM (MFR)
ACGIH TLV:1000 PPM (MFR)

Ingred Name:SUPP DATA: INFORMATION AND SAFE HANDLING AND EXPOSURE
    INFORMATION.

Ingred Name:OTHER PREC: FLAMES/HOT SURF. HEAT &/OR UV RADIA MAY CAUSE
    FORM OF HCL &/OR PHOSGENE .
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESS INHAL CAN CAUSE
    RESP IRRIT, DIZZ, NAUS, HDCH & UNCON. CHRONIC OVEREXP MAY CAUSE
    LIVER, KIDNEY/ LUNG DISEASE, ANEMIA, CORONARY DISEASE/RHYTHM
    DISORDERS OF HEART. SKIN CONT/ABSORP:  PRLNGD/RPTD CONT CAN CAUSE
    MOD IRRIT, DEFAT & DERM. INGEST: SINGLE DOSE TOX IS LOW TO MOD. IF
    VOMIT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OCCURS, ASPIR OF MATL INTO LUNGS CAN
    CAUSE CHEM PNEUM & SYSTEMIC EFTS. EYES: CAN CAUSE SEV IRRIT, RED,
    TEAR & BLURRED VISION. CHLOROCARBON MATLS HAVE PRDCD SENSIT OF
    MYOCARDIUM TO EPINEPHRIN E IN LAB ANIMALS & COULD HAVE SIMILAR EFT
    IN HUMANS. ADRENOMIMETICS (E.G., EPINEPHRINE) MAY BE (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES, LIFTING LIDS.
    GET MEDICAL ATTENTION. SKIN: WASH EXPOSED AREAS WITH SOAP AND
    WATER. INHAL: REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMINISTER
    OXYGEN. IF	BRTHG STOPS GIVE ARTF RESP. GET MED ATTN. INGEST: DO
    NOT INDUCE VOMIT. GET MED ATTN. ASPIR OF MATL INTO LUNGS DUE TO
    VOMIT CAN CAUSE CHEM PNEUM.

=====================  Fire Fighting Measures  =====================

Flash Point:FLAMMABLE SPRAY
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:NIOSH/MSHA APPRVD PRESSURE DEMAND SCBA & FULL
    PROT EQUIP. KEEP CONTRS COOL. USE EQUIP/SHIELD REQD TO PROTECT
    AGAINST BURSTING, RUPTURING/VENTING CONTRS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F)
    CONTAINERS MAY VENT RUPTURE OR BURST. THERMAL DECOMPOSITION
    PRODUCTS MAY INCLUDE HCL AND PHOSGENE .

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. CONTACT
    FEDERAL, STATE OR LOCAL AUTHORITIES FOR APPROVED DISPOSAL
    PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE @ TEMPS ABOVE 120F.
    AEROSOL PROD PRESENT A LIM HAZ DURING STOR/USE IF LAB PREC ARE
    FOLLOWED. INTENTIONAL MIS-USE BY DELIB CONC & (ING 7)
Other Precautions:PLEASE READ & FOLLOW DIREC ON PROD LBL. THEY ARE YOUR
    BEST GUIDE TO USING THIS PROD IN THE MOST EFTIVE WAY, & THEY ALSO
    GIVE NEC SFTY PREC TO PROTECT YOUR HLTH. NO SMOKING IN AREA OF USE.
    DO NOT USE I N GEN VICIN OF ARC WELD, OPEN (ING 5)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC TYPE RESPIRATOR
    ACCEPTABLE IF CONCENTRATIONS IS 350-1000 PPM.
Ventilation:PROVIDE SUFFICIENT MECH (GEN) &/OR LOCAL EXHAUST VENT TO
    MAINTAIN EXPOS BELOW TLV(S).
Protective Gloves:NEOPRENE, NITRILE RUBB/ (ING 6)
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DON'T EAT, DRINK/SMOKE IN WORK AREA. WASH HANDS
    BEFORE EATING.
Supplemental Safety and Health
SPEC GRAV: 1.345@75F(H2O=1). EFTS OF OVEREXP: CONTRAINDICATED EXCEPT
    FOR LIFE-SUSTAINING USES IN HUMANS ACUTELY OR CHRONICALLY EXPOSED
    TO CHLOROCARBONS . NOTE: TOLUENE CAS# 108-88-3 APPEARS ON N AVY
    LIST OF OCCUP CHEM REPROD HAZ. SEEKCONSULTATION FROM APPROP HLTH
    PROFESSIONALS CONCERNING LATEST HAZ LIST (ING 4)

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:112F,44C
Vapor Pres:56PSIG
Spec Gravity:SUPP DATA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MILKY WHITE LIQUID/MILD SWEETISH ODOR
Percent Volatiles by Volume:93

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, OXIDIZERS, ALUMINUM AND OTHER REACTIVE METALS.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:AT ABNORMALLY HIGH TEMPERATURES
    POSSIBLE TRACE AMOUNTS OF PHOSGENE OR HYDROGEN CHLORIDE.
Conditions to Avoid Polymerization:CONTACT WITH HIGHLY ALKALINE
    MATERIAL SUCH AS SODIUM HYDROXIDE AND POTASSIUM HYDROXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PROD DO NOT GENERATE
    HAZ WASTE. EMPTY DE-PRESSURIZED CONTRS CAN NOT BE REUSED & SHOULD
    BE WRAPPED & PUT IN A PERMITTED WASTE MANAGEMENT FACILITY. CONSULT
    FED, ST & LOC DISP	AUTHORITIES FOR APPROVED PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.